Chemical Anchors

Product Details:

Description:

KWIK RE1000-PRO is a Pure Epoxy based chemical designed especially for the Construction Industry. Few applications including anchoring of threaded rods, reinforcing bars or internal threaded rod sleeves into concrete (normal, porous & light) as well as solid masonry. KWIK RE1000-PRO being pure epoxy resin based mortar is used in rotary hammer drilled & diamond core drilled holes and are suitable for extreme loads & with high embedment depths. It has very high bond strength to concrete failure, thus making it suitable for very smooth climate conditions. Ideally suited for high load applications, the resulting bond is stronger than the base material itself and as the system is based on adhesion principle, no additional load stress is imparted to the base material as with expansion type anchors and are therefore ideal for close to edge fixing, reduced centre and group anchoring and use in concrete of unknown quality or low compressive strength. Installation temperature of KWIK RE1000-PRO from +5°C and a service temperature up to 72°C and has high chemical resistance for applications in extreme ambiences e.g. in swimming pools (chlorine) or closeness to the sea (salt). The product is supported with many international approvals which prove it’s capability in nearly every application.

Features:

Heavy Duty Chemical Anchor

 ETA Option 1 Certification

 F 240 Fire Resistance Certification

 Suitability- Base Materials

 Styrene free Chemical

 Slow Curing

 

Application:

Steel & Wooden structural Beams & Columns

 Cantilevers, Pipe supports

 Heavy Duty Fixings

 Pumps, Machines

 Mechanical Equipment’s

 Rock Anchoring

 Percussion / Core drilled holes

 Wet / Water logged holes

 Guard rails, Gates

 Heavy duty ladders

 

Advantages:

High loads & safe Chemical anchoring

 Reliable fixing in cracked & un-cracked concrete

 Excellent Bonding & low shrinkage

 Wide range of construction Base Materials

 Can be used for Deep embedment depths

 Low odour, High chemical resistance

 Fire Resistant upto 240 minutes

 

Base Material:

Concrete

 Cracked Concrete

 Light Weight Honeycomb Brick

 Hollow Dense Aggregate Brick

 Hollow Light Aggregate Brick

 Solid Stone

 Solid Brick

Product Details:

Description:

KWIK VE500-PRO is a Vinylester based chemical anchor is designed especially for the Construction Industry. Few applications of KWIK VE500-PRO including anchoring of threaded rods, reinforcing bars or internal threaded rod sleeves into concrete (normal, porous & light) as well as solid masonry. KWIK VE500-PRO being Vinylester based resin mortar is used in hammer drilled holes and are suitable for extreme loads. The system is based on adhesion principle. The resulting bond is stronger to the base material, no additional load stress is imparted to the base material in comparison with expansion type anchors and are therefore ideal for close to edge fixing, reduced centre, group anchoring. Installation Temperature of KWIK VE500-PRO from -5°C and a service Temperature up to 72°C. KWIK VE500-PRO has high chemical resistance and is suitable for applications in extreme ambiences e.g. in swimming pools (chlorine) or closeness to the sea (salt). The product is supported with several international approvals which prove it’s capability in nearly every application.


Features:

• Fast Setting & Curing 
• Heavy Duty Vinylester Chemical Anchor 
• Vinylester Based Chemical 
• Suitability – All Base Materials 
• Styrene free Chemical
• Thixotropic 
• ETA Option 1 Certification

Applications:

• Rebar Fixings
•  Steel & Wooden Structural Beams & Columns
•  Cantilevers, Pipe Supports
•  Pumps, Machines
•  Guard rails, Gates
•  Heavy duty ladders
•  Mechanical Equipment’s
•  Heavy Duty Fixings
•  Percussion / Rotary Hammer drilled holes
•  Dry / Moist holes

Advantages:

• Suitable for winter, cold application 
•  High loads & safe Chemical Anchoring 
•  Excellent Bonding & Low Shrinkage 
•  Wide range of construction Base Materials
•  Low odour, Low emissions 
•  Resists to most industrial Chemicals

Base Materials:

• Concrete
•  Cracked Concrete
•  Solid Brick
•  Light Weight Honeycomb Brick
•  Hollow Dense Aggregate Brick
•  Hollow Light Aggregate Brick
•  Solid Stone
•  Aerated concrete

Product Details:

Description:
KWIK PE500-PRO is a Polyester based chemical anchor is designed especially for the Construction Industry. Few applications of KWIK PE500-PRO including anchoring of threaded rods, reinforcing bars or internal threaded rod sleeves into concrete (normal, porous & light) as well as solid masonry. KWIK PE500-PRO being Polyester based resin mortar is used in hammer drilled holes and are suitable for high loads. The system is based on adhesion principle. The resulting bond is stronger to the base material, no additional load stress is imparted to the base material in comparison with expansion type anchors and are therefore ideal for close to edge fixing, reduced centre, group anchoring. Installation Temperature of KWIK PE500-PRO from -5°C and a service Temperature up to 72°C. KWIK PE500-PRO has high chemical resistance and is suitable for applications in extreme ambiences e.g. in swimming pools (chlorine) or closeness to the sea (salt). The product is supported with several international approvals which prove it’s capability in nearly every application.
Features:
Fixing close to free edges
Suitable for dry, wet & flooded holes
Extended gel time 
Polyester Based Chemical
Styrene free 
Cost effective
ETA Option 7 Certification
 
Application:
Canopies
 Ventilation Systems
 Railings
 Hand rails
 Masonry supports 
 Signs
 Safety barriers
 Balcony fences
 Racking
 Dry holes
 
Advantages:
High loads & safe Chemical Anchoring
 Reliable fixing in Un-Cracked concrete 
 Excellent Bonding & low Shrinkage
 Installation comfort at elevated temperatures
 Low odour, High chemical resistance
 Economical chemical
 
Base Materials:
Concrete
 Cracked Concrete
 Solid Brick
 Light Weight Honeycomb Brick
 Hollow Dense Aggregate Brick
 Hollow Light Aggregate Brick
 Solid Stone
 Aerated concrete

Product Details:

We have carved a niche amongst the most trusted names in this business, engaged in offering a comprehensive range of KWIK Injection Mortar.
Specifications:
- Brand Name: KWIK
- Use: Use in Construction